LVDS Connector Types: Complete Selection Guide

While they are generally larger than ultra-compact micro coax connectors, they offer several advantages.

These include:

• Easier assembly
• Strong mechanical structure
• Lower production complexity
• Good field-service accessibility
• Broad availability

JST connector solutions are commonly found in:

• Industrial displays
• Automation equipment
• Embedded control systems
• Test instruments
• General electronics

Many OEM manufacturers appreciate JST connectors because production operators can install them quickly and consistently.

Installation mistakes become less likely compared with ultra-fine-pitch connector families.

A production manager once told our engineering team that saving 20 seconds during assembly was more valuable than reducing connector width by 3 mm.

That comment reflects how connector selection changes when production volume increases.

What looks optimal in CAD software may not always be optimal on the production floor.

FI-X Connectors

FI-X connectors remain one of the most recognizable LVDS connector families in the display industry.

Many LCD panels use FI-X style interfaces.

Common configurations include:

• 20 Pin
• 30 Pin
• 40 Pin
• 50 Pin

These connectors are frequently used in:

• LCD displays
• Industrial monitors
• Embedded screens
• HMI systems
• Replacement cable projects

One reason FI-X connectors remain popular is familiarity.

Many engineers have worked with them previously.

Many LCD manufacturers continue supporting them.

Many replacement cable projects involve FI-X connectors because older equipment often uses this interface style.

A typical replacement project follows a familiar pattern.

The customer contacts Sino-conn because:

• The original supplier is unavailable
• The cable is discontinued
• Lead times are too long
• Cost has increased significantly

The customer then provides:

• LCD model number
• Photos
• Existing cable sample

After reviewing the connector family and pin assignment, an equivalent cable assembly can often be developed without changing the display itself.

This approach helps extend the service life of equipment without requiring expensive redesigns.

Micro Coax Connectors

Micro coax connectors represent one of the most important categories within LVDS cable assemblies.

Unlike traditional discrete-wire solutions, micro coax cables provide individual shielding around signal conductors.

This design improves:

• Signal integrity
• EMI resistance
• Crosstalk control
• High-speed performance

Micro coax LVDS assemblies are commonly used in:

Micro coax solutions are often selected when display quality is critical.

A machine vision system processing thousands of images every hour cannot tolerate unstable signal transmission.

Likewise, medical imaging systems depend on clean image data.

The trade-off is manufacturing complexity.

Micro coax cable assemblies require:

• Precise stripping
• Shield management
• Careful termination
• Additional inspection

At Sino-conn, micro coax cable assemblies typically undergo multiple inspection stages, including process inspection, finished-product inspection, and pre-shipment verification.

This additional attention helps ensure consistent performance in demanding applications.

Wire-to-Board Connectors

Wire-to-board connectors remain one of the most flexible LVDS connector solutions available.

Although they are not always the smallest option, they often provide the greatest customization flexibility.

Common customization areas include:

• Cable length
• Wire gauge
• Shielding structure
• Pin assignment
• Branch configuration
• Connector orientation
• Protective sleeving
• Labels
• Heat shrink
• Grounding structure

Wire-to-board LVDS assemblies are particularly common in:

• Industrial equipment
• Embedded systems
• Control cabinets
• Automation equipment
• Custom display projects

For many OEM manufacturers, the priority is not achieving the smallest connector.

The priority is achieving:

• Stable production
• Reliable installation
• Easy maintenance
• Reasonable cost

One industrial customer originally requested a micro coax display cable because they assumed it would automatically provide the best solution.

After reviewing the enclosure, available space, operating environment, and production process, a wire-to-board LVDS assembly proved more suitable.

The final design reduced manufacturing cost while improving installation efficiency.

This highlights an important lesson.

The best LVDS connector type is not necessarily the most advanced connector available.

It is the connector that best matches the product’s electrical requirements, mechanical constraints, production strategy, maintenance expectations, and long-term supply needs.

Selecting the correct connector family early can save significant time, cost, and engineering effort throughout the life of the product.

How Do LVDS Connector Types Compare?

Many engineers begin comparing LVDS connector types by looking at the connector photo, pitch, or price. While those factors are important, they rarely tell the full story.

Two LVDS connectors may have the same pin count and appear almost identical externally, yet perform very differently once installed inside a finished product.

The real comparison should focus on how the connector affects:

• Signal quality
• Mechanical reliability
• Assembly efficiency
• Service life
• Production cost
• Supply chain stability
• Future maintenance

A connector that works perfectly during prototype testing may create problems during mass production. Likewise, a connector that appears expensive initially may actually reduce total project cost by improving reliability and shortening assembly time.

At Sino-conn, LVDS cable assembly projects often involve evaluating multiple connector options before production begins. In many cases, customers initially request a specific connector series, but after reviewing the application environment, enclosure space, cable routing, and production requirements, a different connector family proves to be a better long-term solution.

The following comparison areas have the greatest influence on project success.

Pitch Size

Pitch is the distance between adjacent contacts within a connector.

It is one of the first specifications engineers notice because it directly affects connector size.

Common LVDS connector pitches include:

Smaller pitch connectors allow more signals to fit into a limited area.

For example, a 40-pin connector with a 0.4 mm pitch occupies significantly less PCB space than a 40-pin connector with a 1.0 mm pitch.

This becomes important when designing:

• Portable ultrasound equipment
• Handheld diagnostic devices
• Industrial tablets
• Embedded AI systems
• Compact robotics controllers

However, many projects focus too heavily on miniaturization.

Smaller pitch connectors introduce several trade-offs:

One customer developing a compact industrial controller requested a 0.4 mm connector because the original design used that specification.

After reviewing the enclosure, Sino-conn engineers found sufficient available space for a 0.5 mm connector.

The benefits included:

• Improved connector availability
• Reduced lead time
• Lower assembly complexity
• Lower component cost

The display performance remained unchanged.

This illustrates an important point: selecting the smallest available connector does not automatically produce the best design.

Pin Count

Pin count determines how many electrical connections are available between devices.

The most common LVDS connector configurations include:

Many buyers assume that matching the pin count guarantees compatibility.

Unfortunately, this assumption often leads to problems.

Consider two 40-pin connectors.

They may differ in:

• Power distribution
• Ground allocation
• Signal pair arrangement
• Backlight control
• Mechanical orientation

A connector can physically fit while remaining electrically incompatible.

This situation occurs regularly in display replacement projects.

A customer may purchase a cable labeled “40-pin LVDS” online, only to discover:

• The display remains black
• Colors appear incorrect
• The backlight does not function
• Signal noise appears on the screen

The root cause is usually incorrect pin assignment rather than connector quality.

When developing custom LVDS assemblies, Sino-conn typically verifies:

• Display model
• LCD datasheet
• Controller board model
• Voltage requirements
• Connector family
• Pin assignment

This process helps prevent compatibility issues before production begins.

Locking Style

Locking mechanisms are often overlooked during connector selection.

However, they have a significant impact on reliability.

Different locking methods include:

The appropriate locking method depends on the operating environment.

For example:

A display installed inside a desktop medical monitor experiences relatively little vibration.

A display installed inside:

• Mobile machinery
• Automated equipment
• Transportation systems
• Robotics platforms

may experience continuous vibration throughout its service life.

In such environments, connector retention becomes critical.

One machine automation customer approached Sino-conn after repeated display interruptions.

The issue was eventually traced to connector movement caused by continuous vibration.

The original friction-lock connector was replaced with a more secure locking structure.

No changes were made to the display or controller.

The problem disappeared.

This example demonstrates why connector retention deserves more attention during product development.

Cable Structure

When comparing LVDS connector types, the connector should never be evaluated separately from the cable.

The cable structure often has an equal or greater influence on system performance.

Common LVDS cable constructions include:

Discrete-wire LVDS cables remain common because they are economical and relatively simple to manufacture.

However, signal requirements continue to increase.

Higher-resolution displays and more compact products often benefit from advanced cable structures.

Micro coax assemblies offer several advantages:

• Improved EMI resistance
• Reduced crosstalk
• Better routing flexibility
• Smaller cable diameter
• Improved signal consistency

For example:

A 40-pin discrete-wire LVDS cable may have an outer diameter significantly larger than an equivalent micro coax assembly.

In products with limited installation space, this difference can be important.

Medical imaging projects frequently utilize micro coax structures because image quality directly affects product performance.

Several medical display customers working with Sino-conn upgraded from discrete-wire solutions after observing signal instability during validation testing.

The cable change improved performance without modifying the display electronics.

EMI Performance

Electromagnetic interference becomes increasingly important as electronic systems become more compact.

Potential noise sources include:

• Switching power supplies
• Motor drives
• Wireless communication modules
• Servo systems
• Industrial controllers

Poor EMI control may create:

• Display flickering
• Horizontal image lines
• Random screen artifacts
• Touchscreen instability
• Failed EMC testing

Many customers initially focus on connector brand selection.

In practice, EMI performance depends on a combination of factors:

A premium connector cannot compensate for poor cable shielding.

Likewise, excellent shielding cannot fully compensate for poor grounding.

Successful EMI control requires all elements to work together.

One machine vision customer experienced image noise whenever nearby servo motors accelerated.

After reviewing the cable assembly, Sino-conn engineers recommended:

• Additional shielding
• Ground optimization
• Modified cable routing

The customer achieved stable operation without changing the display hardware.

This reduced project cost and avoided a major redesign.

Installation Space

Mechanical constraints often determine connector selection before electrical requirements become a factor.

Products continue becoming smaller.

Available routing space continues shrinking.

Examples include:

• Portable medical equipment
• Embedded computers
• Robotics controllers
• Handheld test instruments
• AI edge devices

When evaluating installation space, engineers should consider:

• Connector width
• Connector height
• Cable exit direction
• Bend radius
• Cable thickness
• Service access

The following comparison illustrates common considerations:

One customer designing an embedded display system initially selected a very compact LVDS connector to minimize PCB size.

During prototype assembly, technicians discovered that the cable bend radius exceeded available space inside the enclosure.

A different connector orientation solved the issue without requiring a PCB redesign.

Situations like this occur more often than many engineers expect.

For this reason, Sino-conn often requests:

• Enclosure photos
• Mechanical drawings
• 3D models
• Cable routing sketches

before finalizing a custom cable assembly design.

Total Project Cost

Many purchasing teams compare connectors based solely on unit price.

However, connector cost usually represents only a small portion of total ownership cost.

The following factors often have greater financial impact:

For example:

Saving $0.50 per cable may seem attractive.

But if the connector increases installation time by one minute per unit, labor costs may quickly exceed the component savings.

Similarly, a connector shortage can delay an entire production schedule.

Many OEM manufacturers therefore evaluate connectors using a broader perspective.

They ask:

• Can this connector be sourced consistently?
• Is there an approved alternative?
• Can workers install it easily?
• Will maintenance teams be able to service it later?

These questions often influence the final decision more than connector price alone.

The most successful LVDS cable assemblies balance electrical performance, mechanical reliability, production efficiency, and supply stability. Comparing connector types through this broader lens leads to better long-term results and fewer surprises after production begins.

Which LVDS Connector Types Should You Choose?

Choosing the right LVDS connector type is not about finding the most expensive connector, the smallest connector, or the connector used by another manufacturer. The best choice depends on how the display system will actually be used.

Many projects run into difficulties because connector selection is made too early without considering the entire application. An engineer may select a connector based on a datasheet. Purchasing may focus on cost. The mechanical team may focus on available space. Production may focus on assembly efficiency.

The most successful projects consider all of these factors together.

Before selecting any LVDS connector type, it is worth answering several questions:

• What display panel will be used?
• What resolution does the display require?
• Is the product portable or stationary?
• Does the equipment operate in a high-vibration environment?
• Is EMI performance critical?
• Will the cable need frequent replacement?
• How much installation space is available?
• Is long-term connector availability important?
• Will the product remain in production for five years or more?

These questions often influence connector selection more than connector specifications alone.

At Sino-conn, it is common for customers to request one connector family initially and later switch to another after reviewing enclosure design, production requirements, or supply chain considerations.

The following application-based approach can help simplify the selection process.

LCD Displays

LCD display systems represent one of the largest applications for LVDS connectors.

These products range from simple embedded screens to large industrial displays.

For most LCD projects, the goal is to achieve:

• Stable image quality
• Reliable signal transmission
• Reasonable manufacturing cost
• Easy integration

Common LCD display configurations include:

When selecting connectors for LCD displays, engineers should evaluate more than the display itself.

Important considerations include:

Many display projects fail to consider future availability.

A connector that works today may become difficult to source several years later.

Industrial equipment often remains in production much longer than consumer electronics.

For this reason, many OEM customers working with Sino-conn request both:

• Original connector options
• Compatible connector options

This allows them to evaluate both current requirements and future sourcing flexibility.

A customer producing industrial touch displays originally specified an uncommon LVDS connector family with a lead time exceeding 16 weeks. After reviewing the project, a compatible connector solution reduced lead time significantly while maintaining full functional compatibility.

Industrial Systems

Industrial equipment places different demands on LVDS cable assemblies than consumer electronics.

Many industrial displays operate:

• 24 hours per day
• Seven days per week
• For years without interruption

Examples include:

• HMI panels
• PLC interfaces
• Factory displays
• Automation systems
• Process control equipment

In these environments, reliability often becomes more important than connector size.

Industrial customers usually prioritize:

A small connector may look attractive during design, but maintenance teams often prefer connectors that are easier to replace and service.

One European automation customer originally selected a compact micro-coax LVDS connector because of space concerns.

During field testing, maintenance technicians reported that cable replacement was difficult inside the control cabinet.

The final design switched to a larger connector with improved accessibility.

Although the connector occupied slightly more space, service time was reduced considerably.

This type of trade-off is common in industrial applications.

The connector should support the entire product life cycle, not just the prototype stage.

Medical Devices

Medical equipment often requires the highest level of attention when selecting LVDS connectors.

Image quality, reliability, and documentation are frequently more important than connector cost.

Medical applications include:

• Patient monitors
• Ultrasound systems
• Medical imaging equipment
• Diagnostic displays
• Surgical systems

Display performance directly affects user confidence and operational accuracy.

Even small signal issues can become unacceptable.

Medical customers often focus on:

Micro coax LVDS assemblies are frequently selected for medical displays because they provide:

• Better shielding
• Improved signal integrity
• Reduced crosstalk
• Flexible cable routing

Medical projects also tend to require more documentation.

Customers frequently request:

• Product drawings
• Connector specifications
• Cable specifications
• RoHS information
• REACH information
• PFAS-related information
• COC
• COO

Sino-conn regularly supports medical customers by preparing technical documents before production begins. This helps reduce delays during qualification and validation processes.

One customer developing a portable diagnostic system initially selected a standard discrete-wire LVDS assembly. During image testing, the display experienced occasional interference near the power module. After upgrading to a micro coax structure with improved shielding, image stability improved without requiring changes to the display hardware.

Automotive Displays

Automotive and transportation systems create a unique combination of mechanical and electrical challenges.

Displays may be exposed to:

• Continuous vibration
• Temperature cycling
• Dust
• Moisture
• Long operating hours

A connector that performs well inside an office environment may not perform well inside a vehicle or transportation system.

Important selection factors include:

Connectors used in transportation environments should provide secure retention.

Even slight connector movement can cause intermittent display issues.

Customers often underestimate how much vibration a connector experiences over several years of operation.

Strong locking structures are usually a worthwhile investment in these applications.

In many automotive display projects, the connector itself represents only a small percentage of overall system cost, making reliability the primary concern.

Embedded Equipment

Embedded systems cover an enormous range of products.

Examples include:

• Embedded PCs
• AI edge computers
• Communication equipment
• Control modules
• Network appliances
• Robotics controllers

Connector selection often becomes a balance between:

• Space
• Cost
• Signal quality
• Availability

Many embedded system manufacturers prefer connector families with broad market support because supply flexibility reduces procurement risk.

A common selection approach looks like this:

One embedded computing customer approached Sino-conn while developing an AI processing device with a compact enclosure.

The original LVDS cable routing left almost no room for installation.

After reviewing the enclosure layout, the cable exit direction was modified and the connector orientation adjusted.

No PCB redesign was required, but assembly became significantly easier.

Projects like this demonstrate that connector orientation can be just as important as connector selection.

Machine Vision

Machine vision systems are among the most demanding applications for LVDS cable assemblies.

Unlike many display applications, machine vision systems continuously process image data.

Signal quality directly influences system performance.

Typical applications include:

• Automated inspection systems
• Robotics vision systems
• Measurement equipment
• Quality control systems
• Optical scanning equipment

Customers in this field usually prioritize:

Micro coax LVDS cable assemblies are frequently preferred because they provide superior signal protection.

Common design features include:

• Individual shielding
• Optimized grounding
• Controlled routing
• Enhanced EMI protection

A machine vision customer working with Sino-conn experienced image artifacts that appeared only during high-speed equipment operation.

Initial troubleshooting focused on cameras and software.

However, testing eventually identified signal interference within the display cable assembly.

After upgrading the shielding structure and optimizing cable routing, the problem disappeared.

This example highlights an important reality.

The best LVDS connector type is rarely selected by connector specifications alone.

The correct choice depends on:

• The operating environment
• Mechanical requirements
• Signal requirements
• Production volume
• Service expectations
• Long-term supply strategy

For most projects, connector selection should begin with the application rather than the connector catalog. Understanding how the product will be used often leads to better decisions than simply comparing part numbers or prices.

Can LVDS Connector Types Be Customized?

Yes. In fact, most LVDS cable assemblies used in industrial equipment, medical devices, machine vision systems, embedded computers, robotics, transportation displays, and commercial electronics are customized rather than purchased as standard products.

Many customers initially assume they only need a connector with the correct part number. Once the project enters development, they often discover that the standard cable does not fit the enclosure, the cable length is incorrect, the connector orientation creates installation difficulties, or the signal performance does not meet the application’s requirements.

This is where customization becomes important.

At Sino-conn, it is uncommon for two LVDS projects to be completely identical. Even when customers use the same display model, differences in enclosure design, controller boards, installation methods, cable routing, and production requirements often result in different cable assemblies.

A custom LVDS cable assembly is not limited to changing the cable length. Nearly every aspect of the assembly can be modified to improve performance, simplify installation, reduce cost, or support long-term production.

The most commonly customized areas include:

For many projects, customization eliminates potential problems before they reach production.

Custom Lengths

Cable length is one of the most frequently modified specifications in LVDS projects.

Many customers initially request the same cable length used in a previous product. However, after reviewing the enclosure layout, it often becomes clear that the original design was not optimized.

A cable that is too short may:

• Place stress on connectors
• Increase assembly difficulty
• Create routing problems
• Reduce serviceability

A cable that is too long may:

• Increase material cost
• Occupy valuable internal space
• Create airflow restrictions
• Introduce unnecessary cable management challenges

Typical LVDS cable lengths vary significantly:

One industrial automation customer approached Sino-conn with a 900 mm LVDS cable requirement because that was the length used by their previous supplier.

After reviewing the enclosure and cable routing path, the engineering team recommended reducing the cable length to 650 mm.

The result was:

• Easier installation
• Improved cable management
• Lower material consumption
• Reduced strain near connectors

The display system remained unchanged, but assembly efficiency improved noticeably.

Custom Pinouts

Pinout customization is one of the most critical aspects of LVDS cable design.

This area causes more project delays than many customers expect.

A common misconception is that all connectors with the same pin count share the same electrical assignment.

In reality:

• Two 30-pin connectors may have different signal mappings.
• Two 40-pin connectors may use different voltage arrangements.
• Two displays from different manufacturers may require completely different pin definitions.

This is why physical compatibility alone is not sufficient.

Before manufacturing, Sino-conn typically reviews:

• LCD model number
• Display datasheet
• Controller board specifications
• Voltage requirements
• Backlight requirements
• Ground allocation

Common pinout modifications include:

One customer developing a machine interface display experienced repeated startup failures.

The connector physically matched the display.

The issue was eventually traced to an incorrect pin assignment inherited from an older cable design.

After revising the pinout and validating the wiring, the display operated normally without any hardware changes.

Situations like this demonstrate why pinout verification is one of the most important steps in custom LVDS cable development.

Custom Shielding

As display resolutions increase and electronic systems become more compact, shielding has become increasingly important.

Many signal issues that appear to be display problems are actually cable shielding problems.

Common interference sources include:

• Servo motors
• Inverters
• Switching power supplies
• Wireless communication modules
• High-current power cables
• Industrial drives

Without adequate shielding, customers may experience:

• Display flickering
• Horizontal lines
• Image noise
• Touchscreen instability
• EMC test failures

Several shielding options are available:

The best solution depends on the application environment.

For example:

A factory display mounted near variable frequency drives may require much stronger shielding than a display installed inside a laboratory instrument.

One machine vision customer working with Sino-conn reported image artifacts whenever nearby motors accelerated.

The display itself passed all tests.

After upgrading the cable from a standard structure to a shielded micro coax design, the issue disappeared.

The customer avoided a costly redesign by modifying only the cable assembly.

Connector Options

Many customers ask the same question:

Should we use original connectors or compatible connectors?

The answer depends on the project.

Original connectors are often preferred when:

• The design specification requires them
• Regulatory approval depends on them
• Customer qualification procedures are strict

However, compatible connectors can offer advantages in many situations.

Comparison example:

Some customers automatically assume compatible connectors provide lower performance.

This is not always true.

Many compatible connectors are designed specifically to match original connector functionality and mechanical dimensions.

At Sino-conn, customers can choose between original and compatible connector solutions depending on project requirements, budget, lead time, and approval procedures.

This flexibility is particularly valuable for prototype projects and low-volume production.

Custom Cable Structures

The connector is only one part of the assembly.

The cable structure itself often determines overall performance.

Available cable structures include:

• Discrete wire
• Twisted pair
• Shielded twisted pair
• Micro coax
• Hybrid cable constructions

Each structure offers different advantages.

For example, a medical display project may prioritize signal integrity.

A factory automation display may prioritize durability.

A portable device may prioritize flexibility and compact size.

One customer developing a compact AI computing platform initially specified a standard discrete-wire LVDS cable.

After evaluating signal requirements and internal routing constraints, Sino-conn recommended a micro coax solution.

The resulting cable occupied less space while improving shielding performance.

Connector Orientation

Connector orientation is often overlooked during early design stages.

Yet it can have a significant effect on installation and assembly efficiency.

Common cable exit directions include:

• Straight
• Left Exit
• Right Exit
• Upward Exit
• Downward Exit

A poorly chosen orientation can create:

• Excessive cable bending
• Installation difficulty
• Connector stress
• Increased assembly time

A customer developing a compact embedded computer originally requested a straight-exit LVDS cable.

During prototype assembly, technicians discovered that the cable interfered with adjacent components.

By changing the connector orientation, the cable routing became significantly cleaner without modifying the PCB.

This type of adjustment is often inexpensive but can improve manufacturability substantially.

Prototype Support

Most LVDS projects begin with samples.

Prototype evaluation allows customers to verify:

• Connector compatibility
• Cable routing
• Display operation
• Mechanical fit
• Signal stability

Typical prototype quantities include:

At Sino-conn, engineering drawings are normally prepared before sample production begins.

Customers can review:

• Connector specifications
• Cable structure
• Pin assignment
• Length
• Materials

before approving production.

This process significantly reduces the likelihood of unexpected issues during testing.

For urgent development programs, sample lead times can often be accelerated depending on connector availability and project complexity.

Production Customization

As projects move from development to production, additional customization opportunities become important.

These may include:

• Product labels
• QR codes
• Serial numbers
• Custom packaging
• Batch identification
• Assembly instructions

OEM manufacturers frequently request these features because they simplify production management.

Examples include:

A well-designed cable assembly should support not only electrical performance but also efficient manufacturing.

The most successful LVDS cable projects consider the entire product life cycle—from prototype development and production assembly to field service and future replacement.

That is why customization has become the standard approach for LVDS cable assemblies rather than the exception. The connector, cable, shielding, pinout, orientation, materials, and documentation can all be tailored to fit the specific needs of the product, helping customers achieve better reliability, easier installation, and more efficient production over the long term.

Conclusion

LVDS connectors may appear to be small components, but they play a critical role in display reliability, signal integrity, product manufacturability, and long-term maintenance.

Throughout this guide, we explored:

• What LVDS connector types are
• The most common connector families
• How connector types differ
• Which connectors fit different applications
• How custom LVDS cable assemblies are developed

The most successful projects rarely begin by asking, “Which connector is cheapest?”

Instead, experienced engineers and manufacturers focus on a broader question:

“Which connector and cable assembly will provide the best long-term solution for the product?”

The answer often depends on multiple factors:

• Display model
• Pin count
• Connector pitch
• Signal requirements
• Installation space
• Shielding requirements
• Production volume
• Supply chain considerations

For this reason, many companies choose to work closely with a cable assembly manufacturer during the design stage rather than waiting until procurement begins.

At Sino-conn, we support customers throughout the entire development process, including:

• LVDS connector identification
• Connector selection
• Custom cable design
• Pinout verification
• Drawing preparation
• Prototype manufacturing
• Production support
• Original and compatible connector sourcing

Whether you have a complete engineering drawing, a display datasheet, a connector part number, or simply a photo of an existing cable, our engineering team can help evaluate the requirements and recommend an appropriate solution.

If you are developing a new display product, replacing an obsolete LVDS cable, upgrading an existing design, or searching for a reliable manufacturing partner, contact Sino-conn today for technical support, drawings, prototype development, and custom LVDS cable assembly quotations.