EDP Cable Manufacturer for High-Speed Displays
Engineered for signal integrity—impedance-controlled, EMI-optimized, and delivered fast.
Sino-conn is a professional eDP cable manufacturer from China with 18+ years of experience in wire harness and signal cable production. We help engineers, OEM factories, and distributors develop and produce custom eDP, LVDS, and MIPI cables with reliable quality and stable delivery.
- 3-Day Samples — Prototypes in as fast as 3 days.
- 100% Testing — Continuity / hipot / pin-to-pin / visual.
- Impedance Control — 85Ω/100Ω ±10% with TDR report.
- Low-EMI Builds — Foil + braid + drain wire 360° grounding.
- Certified & Compliant — UL/ISO systems, RoHS/REACH materials.
Why Choose Sino-conn Factory
Designed by SI-minded engineers, built for repeatable mass production.
01
SI-First Design
Our engineers use SI simulation to optimize topology, impedance, and layer stack-up before fabrication. Every eDP cable maintains a clean eye diagram and low jitter performance at 2K–8K resolutions, ensuring stable high-speed signal transmission even in compact assemblies.
02
Rapid Prototyping
Sino-conn provides complete eDP prototypes—molded, assembled, and tested—within 2–3 days. Fast iterations help engineers validate design fit, connector geometry, and mechanical compatibility early in the cycle, shortening your product’s time to market.
03
NO MOQ
We support any order size—from single-piece R&D samples to full-scale OEM production. No MOQ means you can start testing immediately, then scale with identical tooling, process control, and inspection standards for consistent mass production.
04
Connector Ecosystem
Our supply chain covers leading connector brands and verified alternatives. We match mechanical footprints, pin definitions, and electrical performance precisely—balancing cost and performance to suit both high-end and cost-driven applications.
05
100% E-Testing
Every single cable undergoes full electrical verification, including continuity, insulation resistance, and pin-map accuracy. Automated testing eliminates human error, ensuring every shipment meets exacting standards before leaving the factory.
06
Impedance Assured
Each batch is validated using TDR (Time Domain Reflectometry) to confirm 85Ω or 100Ω impedance compliance. We provide recorded waveforms and reports, ensuring consistency for high-speed eDP, LVDS, and V-by-One signal transmission.
07
EMI Engineering
Our EMI design combines aluminum foil, braided shielding, and grounding structures to minimize interference. This multi-layer protection ensures clean image quality and stable data under demanding electromagnetic environments.
08
Traceability
Each harness carries a unique code linked to archived electrical test data and production records. Barcoded traceability supports full lifecycle management, warranty tracking, and transparent after-sales service for global clients.
Products We Build Every Day
Every cable is custom — made for your display interface, tested for signal integrity, and delivered ready for assembly.
eDP Cable Assembly (Standard)
Standard display cable for notebooks, monitors, and panels
eDP Micro-Coax Assembly (High-Speed)
Ultra-fine pitch cable for 4K displays and small devices
Custom EMI-Shielded eDP Harness
Double-layer shielding for interference-sensitive systems
Our Services
OEM / ODM Solutions
We support your design from connector selection to pin definition. Our engineers check impedance and shielding before production.
Engineering Optimization
We help reduce EMI, improve bending radius, and choose better materials for long-term stability.
Rapid Sampling
Prototype cables made and tested within 72 hours. You receive photos, test data, and video proof before shipping.
After-Sales Follow-Up
If your design changes, we adjust quickly. Lifetime engineering support for every project.
About Sino-conn Factory
Many clients worry: “Can this factory really make my custom cable correctly and deliver on time?”
We built Sino-conn to give you a clear answer — yes, we can, and we prove it with data.
- Factory Size: 10 000 m² modern facility in Dongguan, China
- Production Lines: 20 assembly + 6 testing lines
- Monthly Capacity: 200 000 + pcs
- Team: 20 + engineers specialized in signal cable design
- Annual Output: 5.6 million + custom assemblies
- Export Markets: 80 + countries — USA, Germany, Japan, Korea, Canada,Australia,etc.
- On-Time Delivery: 99 % + average punctuality
- Defect Rate: below 0.2 % through 3-stage inspection
Our process is transparent: you get drawings before production, videos during assembly, and inspection photos before shipment. That’s why so many OEMs choose us as a long-term technical partner, not just a supplier.
下面展示6-10张工厂核心关键工序的照片进行轮播，尺寸一样，实力展示
Tailored to Your eDP Specs
Configure conductors, pinouts, shielding, labels, and validation reports.
Conductor & Structure
Micro-coax / AWG, twisted pairs, pair count & pitch per bandwidth and SI targets.
Connector & Pinout
OEM or alternates; keyed/locking; exact mapping with wiring diagram.
Shielding Strategy
Foil + braid, drain wire, 360° shell ground to lower EMI peaks.
Docs & Reports
CAD, wiring, TDR, continuity/hipot, pull-force; CoC on request.
Capacity & Quality Control
Modern lines, rigorous QC, and repeatable results at volume.
100 % Electrical Testing
Continuity, impedance, and short-circuit test for every cable.
Three-Stage QC
Process check, final check, pre-shipment check.
Reliability Tests
Heat, oil, UV, and 180° bending cycles up to 10 000 times.
Traceable Production
Each batch labeled with lot number + QR inspection record.
Packaging & Shipping That Protects Your Work
We treat every shipment seriously — from one prototype to 100 cartons.
1.Inner Packing Each cable packed in anti-static PE bag with item name, PO, quantity, and QC signature. Each bag holds 50–100 pcs depending on size.
2.Carton Packing Five-layer corrugated cartons (48 × 35 × 30 cm), 18–22 kg each, foam protected. Strong tape sealing with “Fragile” marks.
3.Palletizing 20–30 cartons per pallet (400–600 kg total), shrink-wrapped, ISPM-15 wooden pallets. Photo & video proof provided before dispatch.
4.Shipping Methods Samples → DHL / UPS / FedEx (5–7 days) Bulk → Air (3–5 days) or Sea (15–30 days) Door-to-door DDP available for U.S., EU, Asia.
5.Traceability All cartons labeled with QR codes + lot numbers. Packing list + inspection report + photos sent before shipment.
We keep a 99.8 % on-time delivery rate and zero damage record in the past three years.
Proven Results Across Industries
From prototypes to mass production, we deliver outcomes.Trusted by 600+ Global Brands
Case 1 – Display OEM
Needed 500 pcs eDP to LVDS adapter cables within 2 weeks.
We built & delivered in 10 days.
“Accurate drawings, fast reaction — saved our pilot run.”
Case 2 – Laptop Brand
Required micro-coax eDP for thin 13.3″ panel with tight bend.
Our 1 mm radius design passed first try.
“They know what they’re doing — great factory communication.”
Case 3 – Automation Integrator
Needed EMI-shielded eDP for robotic display modules.
Double shielded version delivered in 3 weeks.
“Good price, stable signal — exactly as promised.”
Try A sample first？
Hey, don’t hesitate to try & feel the FREE SAMPLES before making up your decision
Meet the Cable Experts
Fast drawings, fast quotes, multilingual video calls, even on-site visits.
Built by Engineers, Delivered by Experts
CAD in Hours
Quote in 24h
Video Reviews
Global Visits
EDP Cable for Every Industry Applications
High-speed links for displays that can’t fail.
1. Laptops & Monitors
eDP signal harness for consumer electronics
2. Industrial Displays
LVDS / eDP cables for factory control screens
3. Medical Devices
Shielded cables for imaging & diagnostic systems
4. Automotive Panels
Infotainment and cluster screens
5. Robotics & Automation
Flexible micro-coax lines
6. Gaming & VR Displays
High-speed 144Hz / 8K signal
7. Smart Appliances
Flat FFC solutions for embedded screens
8. Aerospace / Defense
Rugged design for harsh conditions
Certified for Safety & Performance
Processes audited under UL/ISO; materials RoHS/REACH compliant; CoC, test logs, and TDR reports available on request.
Signal Integrity by Design
- Impedance: 85Ω / 100Ω ±10%
- Bandwidth: HBR/HBR2/HBR3 ready
- EMI: Foil + braid + drain options
- Pitch/Pin: Custom pitch & pin counts
- Tests: Continuity / hipot / TDR / pull
Frequently Asked Questions
1.Can you make eDP cables according to my drawing?
Yes. We can replicate or modify any design and provide CAD confirmation before production.
2.Do you accept small quantity or sample orders?
Absolutely. No MOQ—1pc is welcome for testing or verification.
3.Can I choose original or compatible connectors?
Yes. We offer both branded and equivalent options to fit your budget and project.
4.What is your typical lead time?
Samples: 2–3 days. Mass production: 2–4 weeks depending on complexity.
5.Do you provide testing reports?
Yes, all shipments include continuity, insulation, and high-voltage test reports.
6.How do you ensure cable quality?
Triple inspection + Fluke testing + process traceability for every lot.
7.Can you design new cables if I only have pictures?
Yes. Our engineers can reverse-engineer based on your images or samples.
8.What certifications do your materials have?
UL, ROHS, REACH, ISO9001, PFAS-Free, COC, COO.
9.Can you provide different impedance or length options?
Yes, impedance control and length customization are part of our engineering support.
10.How do you ship orders internationally?
By DHL, FedEx, UPS, or sea freight with full export documentation and insurance.
11. Can I visit your factory?
Of course. We welcome on-site or virtual factory tours anytime.
Custom EDP Cable, Made Easy
Fast, flexible, and engineered for precision.
3 Simple Steps to Start Your Project:
1.Tell Us What You Need
Share your specs or photo. We’ll design the best matching solution.
2.Get Solution & Quote
Receive drawing + quotation within 24 hours.
3.Approve for Production
Confirm and start your custom manufacturing today.
GET IN TOUCH
For all inquiries, please feel free to reach out at:
- info@sino-conn.com
- (+86) 13924649075
